MSR technology (468 cikk)

2968467 - Basic terminal block, UM122-FLK16 / EX-MB / 8

Lamp test module, 2 diodes with common cathode: with 4 pairs, for individual wiring, Manufacturer-ID: 2954798

Lamp test module, 2 diodes with common cathode: with 16 pairs, with common triggering, Manufacturer-ID: 2954785

Lamp test module, 2 diodes with common cathode: with 7 pairs, with common triggering, Manufacturer-ID: 2950132

Diode module, with 4 diodes, individually wired, diode type 1N 4007, Manufacturer-ID: 2950048

Cascading setpoint value potentiometer, for selecting presettable setpoints via a 24 V control signal, resistance value 10 kO, Manufacturer-ID: 2942137

Setpoint value potentiometer, to set setpoints individually, resistance value 10 kO, Manufacturer-ID: 2942124

Setpoint value potentiometer, to set setpoints individually, resistance value 4,7 kO, Manufacturer-ID: 2940252

Ex i NAMUR signal conditioner. For operating Ex i proximity sensors and switches in the Ex area. Passive transistor output (resistive according to EN 60947-5-6), line fault transparency, up to SIL ...

Phoenix Contact 2924870

Phoenix Contact 2924867

Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal inputs, resistance thermometer in 2-, 3-, or 4-wire technology, thermocouples, galvanic is...

Programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer in 2-, 3-, or 4-wire technology, thermocouples, galvanic isolatio...

Phoenix Contact 2924676

2-channel NAMUR isolation amplifier with wide-range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available...

NAMUR isolation amplifier,2-channel for operating proximity sensors and switches. The signals are transferred to the control level using relay outputs (N/O contact). Line fault detection (LFD), gal...

NAMUR isolation amplifier, 2-channel for operating proximity sensors and switches. The signals are transmitted to the control level via transistor outputs (passive). Line fault detection (LFD), 3-w...

NAMUR isolation amplifier for operating proximity sensors and switches. The signals are transmitted to the control level via 2 transistor outputs (passive). Line fault detection (LFD), 3-way electr...

NAMUR isolation amplifier for operating proximity sensors and switches. The signals are transferred to the control level using 2 separate relay outputs (N/O contacts). Line fault detection (LFD), g...

NAMUR isolation amplifier for operating proximity sensors and switches. The signals are transferred to the control level using relay output (PDT). Line fault detection (LFD), galvanic 3-way isolati...

2-channel Ex-i NAMUR isolation amplifier with wide-range power supply for proximity sensors and switches. Every channel has a relay with PDT contact as a signal output. Line fault detection (LFD), ...

Repeater power supply and input isolating amplifier, HART. Transfers supplied or active 0/4 - 20 mA signals to a load (active or passive). 3-way electrical isolation, SIL 2 according to IEC 61508.,...

Phoenix Contact 2924184

Ex-i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way is...

Phoenix Contact 2924139

Ex-i solenoid driver. For controlling Ex-i solenoid valves, alarm modules or LEDs installed in Ex areas. Current limitation at 48 mA. For gases up to Group II C, loop-powered, electrical isolation,...

Phoenix Contact Ventilsteuerbaustein MACX MCR-EX#2924113

Phoenix Contact 2924100

Ex-i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detect...

Ex-i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detecti...

Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD),...