As an inexpensive alternative to traditional PC-PLC connections IBHsoftec the IBH Link S7 ++ HS to the drive configuration for communication between PC and Siemens controllers, PLCs and FDT applications before. The IBH Link S7 ++ HS is a compact and robust Ethernet converter for connection through a switch, a hub or even directly to a PC with a common network adapter. The protocol used is the standard TCP / IP. All the advantages of Ethernet come so without the user can benefit, such as the development of remote maintenance via standard routers or VPN connections (Virtual Private Network). Likewise, a direct connection to the Internet is possible. With the IBH Link S7 ++ HS operation on PROFIBUS DP with up to 12 Mbit / s or via PPI, MPI, and is possible. This leads to a significant cost saving, because a use of SimaticNet is just as necessary as the use of a CP communication processor, neither on PC nor PLC side. The IBH Link S7 ++ HS is designed for rail mounting and has the same features / specifications as the bekannnte IBH Link S7 ++. The IBH Link S7 ++ HS provides the following functions: CommDTM for FDT container freely available, GatewayDTM for DP / PA Link freely available, Master Class 2 for acyclic services (DPV1), Web browser configuration, IPv6 support, configuration via NetPro, Windows8 64-bit support , STEP 7 64-bit support, time synchronization, reading the S7 diagnostics buffer via web browser, diagnosis of PROFIBUS slaves via web browser, setting the slave parameters via DPV1, data set routing, configuration of drives, integration into the TIA portal, DHCP, S7 routing via RFC1006 , Fetch / Write via RFC1006, PLC to PLC communication, process data access with other controllers, Windows and Linux, support for STARTER, S7-PCT, PDM, lifelist., COM PROFIBUS, configuration and diagnostics of field devices via TCI, panel configuration, online on SIMATIC S5 via SINEC L2, 16 PC connections, 32 parallel MPI / DP connections, Automatic bus profile detection, RJ45 network (10/100) with auto-negotiation, diagnostic LEDs, External 24V supply possible rail mounting, software compatible with the IBH link S7 ++. About the IBH Link S7 ++ HS, the controller via Ethernet, similar to a CP, to be programmed. All necessary drivers for the SIMATIC S7, the IBHsoftec S7 SoftPLC, STEP7 from Siemens and S7 for Windows® are included in the delivery. Of course, the IBH Link S7 ++ HS collaborates with the IBH OPC Server. Standard HMI applications can communicate via RFC1006 with the IBH Link S7 ++ HS. In addition to the programming functions are for HMI applications and high-level language accesses via a provided API to the IBH Link S7 ++ HS possible. For Windows operating systems are examples in the languages ??Visual Basic, Visual C, Visual C ++, VB.net, Visual C #, Delphi, Java, Excel included in the delivery. Also for Linux are included examples. After IBHNet installation, see the examples: \ IBH softec GmbH \ IBH_Net \ examples. regarded as a further advantage is the easy handling of the IBH Link S7 ++ HS. The comfortable configuration is carried out directly in STEP 7 or S7 for Windows®. To detect whether the IBH Link S7 ++ HS is connected to a 10 Mbit or 100 Mbit network is automatic. Power is supplied via the integrated 24V connector. The IBH Link S7 ++ HS converter is connected to the corresponding socket of the PLC and the hub or directly to the PC. The driver is installed on the PC. With the configuration program, the user assigns the IP address. Thus, the entire installation process has already been completed., Manufacturer-No: 20268 |
