Overview
The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0.
The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
- The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
Security and Quality of Service
- The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
Simple Deployment and Management
- The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
Single View of the Network
- The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
Security
- Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)
Convergence
- LLDP-MED (Media Endpoint Discovery): defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
Resiliency and high availability
- Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models). IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration.
 | |
Címtábla mérete: | 16.000 bejegyzés |
Kapcsolási kapacitás: | 17,6 Gbit/s |
Külső megjelenés: | Rack (1U) |
Biztonság: | UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |
Elektromágneses kompatibilitás: | FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A |
Áramfogyasztás: | 29,9 W |
Beviteli feszültség: | 100 - 127 / 200 - 240 VAC |
Bemeneti áram: | 0,7/0,4 A |
Ethernet-áramellátás (PoE) támogatása: | 382 W; maximum, modelltől függően |
Üzemi hőmérséklettartomány (T-T): | 0 - 45 °C Tárolási hőmérséklettartomány (T-T): -40 - 70 °C |
Relatív üzemi páratartalom-tartomány: | 15 -95 @ 104°F % Tárolási relatív páratartalmi tartomány: 15 - 90 @ 149°F % |
Üzemi magasság: | 3 km M |
Hőleadás: | 102 BTU/h |
Súly: | 2,86 kg |
Vezérlési plaftorm: | IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB |
Látencia, várakozási idő: | 100 Mb Latency: < 6.6 µs; 1000 Mb Latency: < 2.2 µs |
Rögzítés: | Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting |
Bemeneti frekvencia: | 50/60 Hz |
Méret: | Szé x mé x ma 442 x 246,4 x 44,5 mm |
Egyéb kiegészítők, jellemzők: | Memória és processzor: ARM9E @ 800 MHz; 128 MB flash; packet buffer size: 3 MB dynamically allocated; 256 MB DDR3 DIMM Akusztikai nyomás-kibocsátás: teljesítmény: 0, nyomás: 0 dB;Be- és kimeneti portok: 48 RJ-45 autosensing 10/100 ports; 2 autosensing 10/100/1000 ports; 2 fixed Gigabit Ethernet SFP ports; Included; Elektromágneses immunitás: EN 55024, CISPR 24; EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3 |